How to install laminate flooring around curved stairs

With several options to go for in flooring, laminate flooring is the most popular in modern households. Not only does it give you the freedom to reinvent your house décor but also ensures that you achieve this at a low cost.

Also, laminate floors are easy to maintain and withstand various tests of time without getting damaged. However, the primary issue faced in DIY flooring projects is installing laminate floors on curved stairs.

To ensure that you do it with ease and achieve the best results, we prepared a detailed guide on how to install laminate flooring on curved stairs. Here, we lay down a step-by-step procedure that will ensure you complete the process and get amazing results.

Tools and equipment

For a quality finish with laminate flooring, it is necessary to pay attention to details. To go about this, ensure that you possess every tool required for laminate floor installation before starting. Among the essential tools for this include;  

  1. Laminate floor material
  2. Construction adhesive
  3. Tape measure
  4. Spirit level
  5. Knife
  6. Nail gun or hammer
  7. Framing square
  8. Jigsaw
  9. Boxes
  10. Glue shotgun
  11. Pencil

Hint:  It is advisable to use a flooring cost estimator updated with the current market values when getting an approximate cost of installing a laminate floor on your house.

While considering the cost to install laminate floors, do not go for extremely cheap material as you may land on counterfeit products.

Procedure

  1. Before starting to install laminate flooring, it is crucial to get rid of old flooring material. Not only does this ensure that you eliminate chances of error but also you achieve firm contact between the floor and laminate material.  

While at this, ensure that you get rid of any nails and bumps on the floor to ensure that your floor is level. Use a spirit level to notice areas that need to be flattened.

  1. Also, cutting the overhang on your stairs is crucial to strike uniformity on your board. Alternatively, you may consider refilling the space below the overhang. to ensure your overhang is in check, use the framing square on the edge of stairs you are working on.
  2. After leveling your floor, the next task is taking measurements of material to be used. Here, you will require a tape measure to determine the width and length of your stairs, therefore, cutting the right size of laminate material needed.

To handle curved stairs, it is advisable to use boxes to take measurements.

First, measure the length of your wood and mark the area that will need to be curved. Next, use your knife to make slight longitudinal cuts so that your laminate material comes into contact with your floor without breaking. When doing this, be keen on the depth of the cut to avoid splitting the laminate into two.

Hint: Before you install laminate flooring, let the material sit in the house to avoid the error that may be caused by varying temperature and humidity. Alternatively, leave a 2mm space between the walls and the material, therefore, allowing for expansion.

  1. Take the laminate material with the cuts and apply construction adhesive on the side that will come into contact with the floor.
  2. Fix nails to one end of the laminate to ensure that it does not slip; leaving a space at the end. After doing this, press the laminate unto the wall paying attention to the curved area.
  3. To achieve a strong bond with the floor, consider adding nails to the laminate. Also, add filler on spaces in the laminate to avoid water from seeping in and causing dumpiness.
  4. Attach the stair nose to the ends of your stairs to cover nails.

Having put a laminate floor on your curved stairs, it is time to fix the area adjacent to the floor. For this, place a box on the corner of your stairs, and cut the box accordingly providing for the curve.

After this, place the box on your laminate board and make a neat cut using your jigsaw. Next, put your board on its place and repeat the procedure to cut the adjacent block to a fit. After completion of the process, apply foam underlay and put your measured laminate material in place.

Having done this, pin the laminate floor using nails, therefore, preventing any movements before the adhesive dries off. To achieve the best results, get more tips on laminate floor installation, therefore, maximizing durability and getting a quality finish.

Caution: When fixing your laminate floor, ensure that you wear gloves, and other protective material as the adhesive can be a bit messy. Also, take caution when dealing with cutting tools as they may lead to devastating harm if mishandled.